Vesna Manojlovic

RIPE Atlas Anchors Pilot: Summary and Next Steps

Vesna Manojlovic
Contributors: Michela Galante
0 You have liked this article 0 times.

This article summarises the findings from the pilot phase of the RIPE Atlas anchors project, and gives details about the decision to move to production using a one-service, smaller box for RIPE Atlas anchors.

UPDATE: RIPE Atlas anchors became a production service in October 2013. You can find the most up-to-date information on the RIPE Atlas website . Please email for any feedback or questions about RIPE Atlas anchors.

First and foremost, we want to thank the RIPE Atlas anchor hosts for taking part in the pilot phase of the project - your participation made RIPE Atlas anchors possible!

We announced the end of phase one of the pilot in this RIPE Labs article , and we informed you about the latest features in July  and beginning of September . Now we want to announce the decision about moving forward towards the production service, aligned with the plans described recently in Future of RIPE NCC Technical Services .


RIPE Atlas anchors support many more baseline measurements than regular RIPE Atlas probes, and act as well-known and co-operating targets for user-defined measurements set up by probe hosts throughout the RIPE Atlas network. They are hosted by those with sufficient bandwidth to support this larger number of incoming measurements. To recognise this service to the community, RIPE Atlas anchor hosts earn additional credits they can use to perform their own user-defined measurements and in the near future will get access to a wider range of services.

Since September 2012, when the project was announced at the RIPE 65 meeting, we have had 15 anchor hosts join the project. Below you can see when they became operational.

Number of anchors Time the RIPE Atlas anchors became operational

Goals and benefits of RIPE Atlas anchors

From the beginning, the goals for RIPE Atlas anchors have been to:

  • Collect great amount of regional Internet performance data
  • Provide stable targets for incoming measurements
  • Use powerful hardware to perform more outgoing measurements
  • Keep related logistics and operations as simple as possible

The existing features and benefits of hosting an anchor include:

  • The anchor performs as both the target and as a larger probe, with greater measurement capacity
  • Anchor hosts earn extra credits that can be used to perform measurements on their own network(s)
  • Full mesh measurement between all anchors

During the pilot we identified additional goals

  • Achieve greater coverage and expand globally by making it a service also for non-member
  • Make anchor hardware more affordable
  • Reaching to 50 Anchors by end of 2014
Planned additional features include:
  • Anchor hosts benefit from regularly scheduled measurements from surrounding probes
  • Using measurement packet-capturing software, which is being investigated
  • Providing additional added value services like SMS alerts for changes in defined measurements

Currently, there are 15 active anchors , located mostly in the RIPE NCC service region.

RIPE Atlas anchors map Current RIPE Atlas anchor locations

Read more about  RIPE Atlas anchors , or  learn more  about the services they offer.

Production Service

Smaller box for only one service

During the research period, and following intermediate feedback from pilot hosts, we came to the conclusion that we want to build the anchors as a single-service system and, because of that, to use more modest hardware for the anchors when we go to production.

The reasons we came to this decision are:

  • The lower price of the smaller box will allow more hosts to participate: we are looking now at a total price of about €  800 as opposed to €  3000 for the Dell server.
  • Currently, we do not have an additional service to install on the boxes because no expansion is planned for K-root as announced recently in  Future of RIPE NCC Technical Services . It is also worthy to mention that the ownership model of anchors is different from current practices in running K-Root and RIS data collectors 
  • Based on the initial survey, the interest for multiple services was not overwhelming ( see more complete details below )
What does this mean for current RIPE Atlas anchors hosts?

The change in hardware will not affect support of anchor functionality on the current pilot host participants. We will continue to provide support for the anchors currently in use for the duration of the pilot hosts’ service contracts. After that time, the pilot RIPE Atlas anchor hosts will be required to switch to the new hardware.

Technical findings

During the pilot phase, we also investigated the possibility of hosting multiple services on the same box using virtualisation. Extensive research has been done, both by a student intern (documented in this RIPE Labs article ) and by our own RIPE NCC engineers.

We found that although it would be technically possible to offer multiple services on the RIPE Atlas anchor box using virtualisation, we decided not to pursue this for the reasons stated above. If you are interested in the technical findings of the virtualisation investigation, you can learn more in this RIPE Labs article .

Planning and Feedback

Our goal is to bring RIPE Atlas anchors to production around the RIPE 67 Meeting in Athens in October, when we will announce final specifications for the new hardware and invite interested parties to purchase the hardware and host a RIPE Atlas anchor.

We are currently looking at the following hardware specifications for the production RIPE Atlas anchor box: 

  • Soekris box net6501-70 Board
  • in 1U 19 Inch Rackmount Case
  • and mSATA SSD

We will keep you informed about our progress and, as always, we would be happy to receive your feedback or questions, which can be directed to , or discussed on the MAT Working Group Mailing List .


Survey results:

Based on the survey from September 2012, people expressing a need for multiple services on the same box did not form a clear majority; most people were interested in the RIPE Atlas anchor service, and “maybe” other services.

These survey answers were collected from 28 people who were able to choose more than one option when expressing their interest in the box and its services:
-  Nine people responded that they were interested in the box only if it could offer multiple services
-  Fifteen responded that they were interested in the anchor and maybe other services
-  Eight responded that they were only interested in the anchor service, but did not have an interest in a box that could host multiple services

0 You have liked this article 0 times.

You may also like

View more

About the author

Vesna Manojlovic is Community Builder at RIPE NCC. Vesna joined the RIPE NCC as a Trainer in 1999. In 2003, she took responsibility for developing and delivering advanced courses, such as RPSL, Routing Registry, DNSSEC and IPv6. In 2008, she lead efforts to establish IPv6 RIPEness as a measure of IPv6 deployment among LIRs. In 2011, she joined the Science Division as Manager of the Measurements Community Building team; in 2015 she moved to Communications Department as Senior Community Builder, with a focus on organising hackathons. Vesna gives presentations at many technical conferences and workshops, and enjoys visiting hackerspaces. Vesna received a Batchelor of Sciences Degree in Computer Science and Informatics from the School of Electrical Engineering, University of Belgrade. She has three children.

Comments 1